Scan Name: Extentrix
Subnet Detection Scan.
Description: Based on
subnet information, the administrator can determine if the client is
connected to corporate network or to a remote network, in which he will
grant or deny the access to corporate servers. For example, the
administrators may want to make sure that the client accessing the system
resources is using his/her own machine at work. Using this scan, the admins
can identify the IP address and the subnet masks of the machine.
Parameter:
·
IP Address: A string that defines the client's
IP address to be checked.
·
Subnet Mask: A string that defines the
client's Subnet Mask to be checked.
Scan Output:
·
Allow Access - a Boolean output which
indicates whether the client has the same IP Address and Subnet Mask or not.
TRUE – indicates that the
client has the same IP Address and Subnet Mask.
FALSE
– indicates that the client doesn't have the same IP Address or/and Subnet
Mask.
·
License Status- a String output which
indicates whether the scan is licensed or not.
TRIAL LICENSE – indicates
that the scan has a trial license.
INVALID LICENSE – indicates that the scan hasn’t a license.
VALID
LICENSE – indicates that the scan is licensed.
Note: If the License Status has an Invalid License value, the Allow
Access will be false.
To install a custom end point analysis scan package
follow the following steps:
1.
After opening Citrix Access Management Console,
in the console tree select the Endpoint Analysis node.
2.
Right click any of the displayed scan
packages categories and select Import scan package from the drop down
menu list.
Also you can choose to insert
the scan package to any scan category listed in the tree as shown in the
following picture:
3.
A dialog box named “Select Scan Package File”
will appear. Double click on the (.cab) file which contains the Scan.
The package will be displayed
in the console as shown in the following picture:
Please follow the steps below to create scans and rules for
the Extentrix Subnet Detection Scan.
1.
Select ExtentrixSubnetDetectionScan to
create scan for it, right click the icon and choose Create Scan.
2.
Type a name for the scan:
3.
Set the scan conditions:
4.
Type rule name and set rule conditions:
5.
Define an IP Address to be checked. Ex:
172.16.200.155
6.
Define a Subnet Mask to be checked. Ex: 255.255.255.0
7.
When you are done, click Finish.